Outdoor POE Extender Repeater 100M 4-Port 30W Rainproof VLAN
Outdoor POE Extender Repeater 100M 4-Port 30W Rainproof VLAN
Extend Your POE Network Outdoors — No Extra Wiring Needed
This Outdoor Rainproof POE Extender / Repeater lets you push your Power over Ethernet network an additional 100 metres beyond your existing switch — without running new cables or adding a separate power supply. Simply plug it in and it works, making it the ideal solution for extending coverage to outdoor IP cameras, wireless access points, and other POE devices. Made in Mainland China.
Key Features
- Plug-and-Play Setup: No configuration required — connect and go in seconds.
- 100M Range Extension: Extends your POE network reach by up to 100 metres per hop.
- 4-Port Output (1 Uplink + 3 POE): One 10/100Base-TX upstream PD receiving port plus three downstream POE ports for connecting cameras or APs.
- IEEE 802.3af/at Compliant: Compatible with standard POE switches and injectors (44–57V input).
- 30W Input / 25.5W Output: Intelligently allocates power across 1–3 downstream ports for efficient distribution.
- VLAN Support: Helps segment your network for improved security and performance.
- Outdoor Rainproof Design: IP30-rated engineering plastic enclosure with a pull-out sliding box for easy installation, disassembly, and a superior waterproof seal when mounted vertically.
- Wall-Mount Ready: Designed for permanent outdoor wall mounting — no exposed cables, clean professional finish.
- Surge Protection: Built-in 2kV (8/20µs) surge protection guards connected devices against voltage spikes.
- Wide Operating Temperature: Functions reliably from -10°C to 60°C, suitable for a wide range of outdoor climates.
- Store-and-Forward Switching: 0.8 Gbps switching capacity with a 1K MAC address table and 100 Mbps transmission rate.
Technical Specifications
| POE Standard | IEEE 802.3af/at |
| Network Interface | 1× 10/100Base-TX upstream PD port; 3× 10/100Base-TX POE ports |
| Forwarding Mode | Store-and-Forward |
| MAC Address Table | 1K |
| Switching Capacity | 0.8 Gbps |
| Input Voltage | 44–57V |
| POE Input Power | 30W (max) |
| POE Output Power | 25.5W (max), intelligent 1–3 port allocation |
| Transmission Rate | 100 Mbps |
| Power Supply Pins | 1/2(+) 3/6(−) or 4/5(+) 7/8(−) receive; 1/2(+) 3/6(−) supply |
| Surge Protection | 2kV 8/20µs |
| Operating Temperature | -10°C ~ 60°C |
| Dimensions | 140 × 85 × 32 mm |
| Material | Engineering Plastic |
| Indicator Lights | Green / Yellow LED |
| Package Contents | 1× POE Extender/Repeater |
What's in the Box
- 1× Outdoor Rainproof POE Extender / Repeater (4-Port, 30W)
You Might Also Like
- 5-Pair Nitrile Work Gloves – Anti-Slip Full Finger Safety — ideal for safe handling during installation
- Waterproof Butyl Tape – Thickened Blue & Silver Wall Crack Seal — perfect for sealing cable entry points outdoors
- Microwave Vent Kit Galvanized Steel Duct Transition Fitting – Silver — another great outdoor installation accessory
Learn more: OSHA on eye and face protection
Frequently Asked Questions
Q: How far can this POE extender extend my network signal?
A: This POE extender/repeater can extend your existing POE network by up to 100 metres per unit. You can daisy-chain multiple units for even greater distances, making it ideal for large outdoor surveillance or wireless AP setups.
Q: Is this POE extender compatible with my existing POE switch?
A: Yes. The unit is fully compliant with the IEEE 802.3af/at POE standard and accepts an input voltage of 44–57V. It will work with any standard POE switch or injector that meets these specifications — no special hardware required.
Q: Can I install this unit outdoors in wet conditions?
A: The extender features a rainproof engineering plastic enclosure designed for outdoor wall mounting. It is best installed vertically, as this orientation provides a superior waterproof seal thanks to the pull-out sliding box design. The operating temperature range of -10°C to 60°C also makes it suitable for a wide variety of outdoor climates.
Q: How many devices can I connect to this POE extender?
A: The extender has three downstream POE output ports, allowing you to connect up to three POE-powered devices (such as IP cameras or wireless access points) simultaneously. Power is intelligently distributed across the ports up to a maximum of 25.5W total output.
Production & Packaging Notice
To maintain high stock availability and fast shipping times, our items are sourced from multiple verified manufacturing facilities. While the core quality, materials, and product specifications remain identical, you may notice slight variations in the packaging design, manufacturing origin, or the wording of the printed instructions.