Elegoo Mars 2 Pro 6.08" 2K Mono LCD Replacement Screen

ChiTu 6.08" 2K Mono LCD Screen for Elegoo Mars 2 Pro 3D Printers

Upgrade or restore your resin 3D printer with this high-quality 6.08-inch 2K Monochrome LCD replacement screen (Model: DXQ608-X04 / PJ608-X04) from ChiTu Systems. Engineered specifically for the Elegoo Mars 2 Pro, this mono LCD panel delivers razor-sharp 1620×2560 resolution, ensuring crisp, detailed prints with faster UV curing times thanks to its high-transmittance design.

Made in Mainland China.

Key Features

• Resolution: 1620 × 2560 (2K Mono)
• Screen Size: 6.08 inches
• Model: DXQ608-X04 / PJ608-X04
• Higher transmittance than the previous DXQ-608 mono screen for faster, more efficient UV exposure
• Compatible with: Elegoo Mars 2 Pro & Voxelab Proxima (V3 motherboard required)
• No assembly required — drop-in replacement module
• Flat panel form factor for easy installation

Important Setup Notes

• ⚠️ This screen (PJ608-X04) requires a firmware update to work properly compared to the previous DXQ608-X04 version. Please update your printer firmware before installation.
• For Voxelab Proxima users: Confirm your printer has a V3 motherboard — earlier motherboard versions are not compatible.
• Due to the higher transmittance of this screen, exposure settings must be adjusted. Recommended tested parameters:
  • Exposure Time: 2 seconds
  • Bottom Exposure Time: 25 seconds

Specifications

You May Also Like

Looking for other workshop or maker essentials? Check out these related products:

• 10-Pack 65mm Oscillating Multi-Tool Saw Blades | Carbon Steel
• 5-Pair Nitrile Work Gloves – Anti-Slip Full Finger Safety
• T2 Pure Bare Copper Wire 0.1–2mm Round Solid Uncoated 10M

Learn more: OSHA on personal protective equipment

Frequently Asked Questions

Q: Is the Elegoo Mars 2 Pro 6.08" 2K Mono LCD Screen compatible with the Voxelab Proxima?

A: Yes, the PJ608-X04 mono LCD screen is also compatible with the Voxelab Proxima, but only if your printer is running a V3 motherboard. If you have an earlier motherboard revision, this screen will not be compatible. Always verify your motherboard version before purchasing.

Q: Do I need to update my firmware after installing this replacement screen?

A: Yes. The PJ608-X04 screen requires a firmware update compared to the older DXQ608-X04 version. Without the firmware update, the screen may not function correctly. Please download and install the latest compatible firmware from ChiTu Systems before or immediately after installation.

Q: Why do I need to change my exposure settings with this new screen?

A: The PJ608-X04 has a higher UV light transmittance than the previous DXQ-608 mono screen. This means more UV light passes through per second, which can over-cure your resin if you use the old exposure times. ChiTu Systems recommends reducing your exposure time to 2 seconds and your bottom exposure time to 25 seconds as a starting point, then fine-tuning as needed for your specific resin.

Q: Does this LCD screen come pre-assembled or does it require installation?

A: This is a replacement module — no complex assembly is required. It is designed as a direct drop-in replacement for the Elegoo Mars 2 Pro's existing screen. Basic disassembly of your printer's screen cover is needed to swap the panel, but no soldering or advanced technical skills are required.

Production & Packaging Notice

To maintain high stock availability and fast shipping times, our items are sourced from multiple verified manufacturing facilities. While the core quality, materials, and product specifications remain identical, you may notice slight variations in the packaging design, manufacturing origin, or the wording of the printed instructions.