0.91" SPI White OLED Display Module SSD1306 128×32 15-Pin
0.91" SPI White OLED Display Module SSD1306 128×32 15-Pin
0.91 Inch SPI White OLED Display Module – SSD1306 | 128×32 | 15-Pin IPS
Upgrade your DIY electronics, embedded systems, or wearable projects with this compact yet powerful 0.91-inch IPS OLED display module. Driven by the widely supported SSD1306 IC, this 128×32 white-pixel panel delivers stunning contrast and ultra-low power consumption — making it a top choice for makers, engineers, and hobbyists alike. Made in Mainland China.
Key Features
- Exceptional High-Contrast Display: Self-lit OLED technology requires no backlight, achieving a contrast ratio exceeding 10,000:1 for ultra-sharp, crisp text and graphics — even in low-light or fully dark environments.
- Gold-Plated 15-Pin FPC Connection: Premium flexible polyimide FPC cable paired with gold-plated contact pins resists bending fatigue and oxidation, ensuring consistent signal transmission and eliminating display glitches over extended use.
- Ultra-Wide 170° Viewing Angle: Precision-aligned OLED pixel array maintains brightness and clarity from virtually any angle with zero color shift — perfect for handheld and wearable device applications.
- Energy-Efficient Low-Power Design: Draws only 0.06W at full brightness; minimal standby consumption extends the battery life of portable devices and reduces charging frequency.
- Durable Tempered Glass Encapsulation: Scratch-resistant, high-transparency glass protects the internal display array from dust, light impacts, and moisture. Operates reliably from −40°C to 85°C — suitable for indoor and outdoor projects alike.
Specifications
| Display Size | 0.91 inch (active area) |
| Resolution | 128 × 32 pixels |
| Driver IC | SSD1306 |
| Interface | SPI (15-Pin) |
| Color | White (monochrome) |
| Viewing Angle | 170° |
| Power Consumption | 0.06W (full brightness) |
| Operating Temperature | −40°C to 85°C |
| Materials | OLED panel, flexible polyimide FPC, tempered glass, gold-plated pins |
| Package Contents | 1 × OLED Display Module |
| Country of Origin | Mainland China |
Applications
- Wearable smart devices & fitness trackers
- DIY Arduino / Raspberry Pi projects
- Embedded system status indicators
- Small sensor data monitors
- Handheld portable electronics
- Smart home accessory displays
Notes
Minor measurement deviations may occur due to manual measurement methods. Actual display color may vary slightly from product images depending on your monitor's calibration settings.
Related Products You May Like
- T2 Pure Bare Copper Wire 0.1–2mm Round Solid Uncoated 10M
- Ball End Hex Screwdriver Bit – Magnetic Reduced Shank Steel
- 2-Pack E27 Multi-Head Lamp Socket Adapter 3/4/5 Head Ceiling
Learn more: ENERGY STAR product efficiency guidance
Frequently Asked Questions
Q: What microcontrollers is the SSD1306 OLED display module compatible with?
A: The SSD1306-driven 0.91-inch OLED display module is compatible with a wide range of popular microcontrollers and single-board computers, including Arduino (Uno, Nano, Mega), Raspberry Pi, ESP8266, ESP32, and STM32. The SPI interface and widely available SSD1306 libraries make integration straightforward for most DIY and embedded projects.
Q: Does this OLED display module require a separate backlight power source?
A: No. OLED technology is self-emissive — each pixel generates its own light, so no separate backlight is needed. This contributes to the module's ultra-low 0.06W power draw at full brightness, making it ideal for battery-powered wearable and portable devices.
Q: What is the difference between SPI and I2C versions of the SSD1306 display?
A: The SPI (Serial Peripheral Interface) version, like this 15-pin module, offers faster data transfer speeds compared to I2C, making it better suited for applications that require frequent screen updates or higher refresh rates. I2C uses fewer pins but operates at a slower communication speed. Choose SPI when performance matters in your embedded or DIY project.
Q: Can this display module be used in outdoor or industrial environments?
A: Yes. The tempered glass encapsulation protects the OLED panel from dust, light impacts, and moisture, and the module supports stable operation across a wide temperature range of −40°C to 85°C, making it suitable for both indoor and outdoor industrial or maker project use.
Production & Packaging Notice
To maintain high stock availability and fast shipping times, our items are sourced from multiple verified manufacturing facilities. While the core quality, materials, and product specifications remain identical, you may notice slight variations in the packaging design, manufacturing origin, or the wording of the printed instructions.