{"product_id":"anycubic-photon-m3-max-fep-film-390x260x01mm-136-inch-lcd-3d-printer","title":"Anycubic Photon M3 Max FEP Film 390×260×0.1mm | 13.6\" LCD Printer","description":"\u003ch2\u003eAnycubic Photon M3 Max FEP Film – Precision Replacement for 13.6\" LCD 3D Printers\u003c\/h2\u003e\n\u003cp\u003eKeep your Anycubic Photon M3 Max running at peak performance with this precision-cut FEP (Fluorinated Ethylene Propylene) replacement film. Engineered specifically for the 13.6-inch LCD resin 3D printer format, this film ensures crisp, clean layer separations and consistent UV light transmission — print after print.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Replace Your FEP Film Regularly?\u003c\/h3\u003e\n\u003cp\u003eThe FEP film is one of the most critical consumable components in any MSLA\/LCD resin 3D printer. Over time it becomes cloudy, scratched, or develops micro-punctures that reduce print clarity and cause failed prints. Swapping it out with a fresh, purpose-fit film restores optical clarity and extends the life of your resin vat.\u003c\/p\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 390 × 260 × 0.1 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Printer:\u003c\/strong\u003e Anycubic Photon M3 Max (13.6-inch LCD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e FEP (Fluorinated Ethylene Propylene)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 0.1 mm — optimal balance of flexibility and durability\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh UV Transmittance:\u003c\/strong\u003e Ensures sharp, detailed layer curing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChemical Compatibility:\u003c\/strong\u003e Resistant to standard UV resins\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Chitu Systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in Mainland China\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e✅ \u003cstrong\u003ePrecision-Cut Fit\u003c\/strong\u003e — Pre-sized at 390×260mm for a straightforward, hassle-free installation on your Photon M3 Max vat frame\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003e0.1mm Slim Profile\u003c\/strong\u003e — Thin enough for easy peel-off during printing while maintaining structural integrity under repeated use\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eHigh UV Clarity\u003c\/strong\u003e — Excellent light transmission keeps your prints sharp and dimensionally accurate\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eResin-Resistant Surface\u003c\/strong\u003e — FEP material naturally repels UV resin, making cleanup faster and reducing vat contamination\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eRestores Print Quality\u003c\/strong\u003e — A worn or cloudy FEP is often the hidden culprit behind failed prints; a fresh film brings your printer back to factory-fresh output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eThis FEP film is the ideal maintenance accessory for hobbyists, designers, engineers, and professional makers who rely on the Anycubic Photon M3 Max for large-format resin printing. Whether you're printing miniatures, dental models, prototypes, or jewelry masters, consistent FEP film maintenance is essential to reliable results.\u003c\/p\u003e\n\n\u003ch3\u003eExplore More Useful Accessories\u003c\/h3\u003e\n\u003cp\u003ePair your 3D printer setup with other handy workshop tools from our store:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"\/products\/10-pack-65mm-oscillating-multi-tool-saw-blades-high-carbon-steel\"\u003e10-Pack 65mm Oscillating Multi-Tool Saw Blades | Carbon Steel\u003c\/a\u003e — great for trimming and finishing printed parts\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/products\/nitrile-work-gloves-anti-slip-full-finger-5-pair\"\u003e5-Pair Nitrile Work Gloves – Anti-Slip Full Finger Safety\u003c\/a\u003e — essential protection when handling UV resin\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/products\/stackable-non-slip-furniture-risers-anti-vibration-pads\"\u003eStackable Non-Slip Furniture Risers – Anti-Vibration Pads\u003c\/a\u003e — reduce vibration under your printer for more stable prints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eLearn more: \u003ca href=\"https:\/\/www.osha.gov\/hand-power-tools\" target=\"_blank\" rel=\"noopener\"\u003eOSHA guidance on hand and power tools\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eQ: Is this FEP film compatible with other Anycubic printers besides the Photon M3 Max?\u003c\/h4\u003e\n\u003cp\u003eA: This film is specifically sized at 390×260mm for the Anycubic Photon M3 Max 13.6-inch LCD printer. While FEP film can sometimes be trimmed to fit other vats, we recommend verifying your printer's exact vat dimensions before purchasing for a different model to ensure a proper, leak-free fit.\u003c\/p\u003e\n\u003ch4\u003eQ: How often should I replace the FEP film on my Anycubic Photon M3 Max?\u003c\/h4\u003e\n\u003cp\u003eA: Most experienced users recommend replacing the FEP film every 1–3 months depending on print volume and resin type. Signs that replacement is needed include cloudiness or haziness in the film, visible scratches, small holes, or a noticeable decline in print quality and adhesion.\u003c\/p\u003e\n\u003ch4\u003eQ: Is the FEP film difficult to install on the Photon M3 Max?\u003c\/h4\u003e\n\u003cp\u003eA: No — because this film is pre-cut to the exact dimensions of the M3 Max vat frame (390×260mm), installation is straightforward. Simply remove the old film, clean the vat frame thoroughly, and secure the new film with the frame screws. Refer to your Anycubic Photon M3 Max manual for the full step-by-step process.\u003c\/p\u003e\n\u003ch4\u003eQ: Does the 0.1mm thickness affect print quality?\u003c\/h4\u003e\n\u003cp\u003eA: The 0.1mm thickness is the industry-standard sweet spot for MSLA\/LCD resin printers. It is thin enough to allow smooth peel separation during printing (reducing layer delamination failures) while being durable enough to withstand hundreds of print cycles when handled carefully.\u003c\/p\u003e\n\u003c!-- production-packaging-notice --\u003e\n\u003ch3\u003eProduction \u0026amp; Packaging Notice\u003c\/h3\u003e\n\u003cp\u003eTo maintain high stock availability and fast shipping times, our items are sourced from multiple verified manufacturing facilities. While the core quality, materials, and product specifications remain identical, you may notice slight variations in the packaging design, manufacturing origin, or the wording of the printed instructions.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is this FEP film compatible with other Anycubic printers besides the Photon M3 Max?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This film is specifically sized at 390×260mm for the Anycubic Photon M3 Max 13.6-inch LCD printer. While FEP film can sometimes be trimmed to fit other vats, we recommend verifying your printer's exact vat dimensions before purchasing for a different model to ensure a proper, leak-free fit.\"}}, {\"@type\": \"Question\", \"name\": \"How often should I replace the FEP film on my Anycubic Photon M3 Max?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Most experienced users recommend replacing the FEP film every 1–3 months depending on print volume and resin type. Signs that replacement is needed include cloudiness or haziness in the film, visible scratches, small holes, or a noticeable decline in print quality and adhesion.\"}}, {\"@type\": \"Question\", \"name\": \"Is the FEP film difficult to install on the Photon M3 Max?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No — because this film is pre-cut to the exact dimensions of the M3 Max vat frame (390×260mm), installation is straightforward. Simply remove the old film, clean the vat frame thoroughly, and secure the new film with the frame screws. Refer to your Anycubic Photon M3 Max manual for the full step-by-step process.\"}}, {\"@type\": \"Question\", \"name\": \"Does the 0.1mm thickness affect print quality?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The 0.1mm thickness is the industry-standard sweet spot for MSLA\/LCD resin printers. It is thin enough to allow smooth peel separation during printing (reducing layer delamination failures) while being durable enough to withstand hundreds of print cycles when handled carefully.\"}}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"BreadcrumbList\", \"itemListElement\": [{\"@type\": \"ListItem\", \"position\": 1, \"name\": \"Home\", \"item\": \"https:\/\/wb8bmu-rg.myshopify.com\/\"}, {\"@type\": \"ListItem\", \"position\": 2, \"name\": \"Home page\", \"item\": \"https:\/\/wb8bmu-rg.myshopify.com\/collections\/frontpage\"}, {\"@type\": \"ListItem\", \"position\": 3, \"name\": \"Anycubic Photon M3 Max FEP Film 390×260×0.1mm | 13.6\\\" LCD Printer\", \"item\": \"https:\/\/wb8bmu-rg.myshopify.com\/products\/anycubic-photon-m3-max-fep-film-390x260x01mm-136-inch-lcd-3d-printer\"}]}\u003c\/script\u003e","brand":"Xpnd","offers":[{"title":"3pcs \/ Russian Federation","offer_id":67748710678765,"sku":"200007763:201336103;5:2764#3pcs","price":50.9,"currency_code":"USD","in_stock":true},{"title":"3pcs \/ Germany","offer_id":67748710711533,"sku":"200007763:201336101;5:2764#3pcs","price":79.47,"currency_code":"USD","in_stock":true},{"title":"3pcs \/ China Mainland","offer_id":67748710744301,"sku":"200007763:201336100;5:2764#3pcs","price":66.58,"currency_code":"USD","in_stock":true},{"title":"3pcs \/ Brazil","offer_id":67748710777069,"sku":"200007763:203054829;5:2764#3pcs","price":79.47,"currency_code":"USD","in_stock":true},{"title":"3pcs \/ United States","offer_id":67748710809837,"sku":"200007763:201336106;5:2764#3pcs","price":79.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0840\/1269\/5789\/files\/Sd181a98c5cd447349d80b8660e6bb42et.webp?v=1791898670","url":"https:\/\/xpndservice.com\/products\/anycubic-photon-m3-max-fep-film-390x260x01mm-136-inch-lcd-3d-printer","provider":"XPND","version":"1.0","type":"link"}